Structural Steel plate

Trusted BS EN 10025-3 S355NL Weldable Fine Grain Structural Plates, view S355nl equivalent material

We deliver S355NL Structural Steel Plates with Exceptional sizes, standard, and Quality, call us to know more about Ready stock

s355nl equivalent material is a normalized weldable fine grain structural steel. They have a good yield strength at room temperature. Apart from this they also offer high flexibility, rugged construction, and accurate dimensions. Moreover, these S355NL Structural Steel Plates also provide a good surface finish and durability. Features such as the ability to resist general corrosion, stress corrosion cracking, and crevice corrosion has raised the demand for these S355NL Plates. They are put through various tests to enhance and check the properties displayed by these plates. 

The S355NL weldable fine grain structural steel plate is capable of displaying high properties with a single precipitation or aging treatment.  It remains ductile and soft in solution annealed condition. The surface cracking of BS EN 10025-3 s355nl plate can be reduced by increasing the pull speed, controlling the chemical elements of smelting, adjusting the protection slag, and optimizing modal vibration parameters. EN10025 S355NL alloy steel plates can be machined in the annealed condition however post-machining solution treatment of parts might be required before final hardening. We have been producing and supplying this worldwide to our customers at an affordable price without compromising on the quality of it.

Manufacturer of EN10025 S355NL alloy steel plate at any specifications for the clients.

What Is S355NL Steel Plate ?

There are a variety of grades available in the market for manufacturing steel plates. One such grade is the  S355NL. S355NL Steel Plate is a hot rolled,  low carbon manganese steel. It has medium tensile strength and is readily weldable. It displays resistance to impact even at sub-zero temperatures. These S355NL Steel Plates are usually supplied in normalized and untreated conditions. They are available in several variations that offer slight modifications. They offer machinability similar to mild steel. 

S355NL Structural Steel Plates Specifications

  • Steel Standard: EN 10025-3
  • Third Party Inspection : IEI, IKE, ABS, CCS, LR, NK, SGS, BV, KR, RINA, DNV, GL, CE, or other quality department.
  • Width: from 2 meters wide to 3m
  • Thickness: 6 mm to 200 mm
  • Length: Up to 12 meters
  • Classification: Normalized rolled weldable fine grain structural steels

We Guarantee Fastest Delivery S355NL Plate with All Documents Including Mill Certificate

Comparison Of Grades

MATERIAL# 1.0456UNE36081AE 355 KT
DIN17102TStE 355
UNFe E 355 KT N
NFA 36 201E355FP
BS144950 EE

BS EN 10025-3 S355NL Plate Impact Test

Temperature-50-40-30-20-10020
Notch impact test. Min. absorbed energy27314047515563

S355nl Weldable Fine Grain Structural Plate Stock List

GAUGE (INCHES)WIDTH (INCHES)LENGTH (INCHES)
0.375060/96/120480
0.500060/96/120480
0.625060/96/120480
0.750060/96/120480
0.875060/96/120480
1.000060/96/120480
1.125060/96/120480
1.250060/96/120480
1.500060/96/120480
1.750060/96/120480
2.000060/96/120480
2.250060/96/120480
2.500060/96/120480
2.750060/96/120480
3.000060/96/120480
3.500060/96/120480
4.000060/96/120480

We have a large inventory of BS EN 10025-3 S355nl plate in almost all length, S355NL Steel Plate

S355NL Steel Plate Chemical Structure

C %Si %Mn %P %S %V %AL %Cr %
0.1800.5000.9-1.650.0250.0200.1200.0200.300
Cu %Mo %Nb %Ni %Ti %N %

0.5500.1000.0500.3000.0500.015
 

Mechanical Property Of S355NL Plate

Thickness(mm)Min Yield (Mpa)Tensile(MPa)Elongation(%)Min Impact Energy
8mm-100mm235Map-275Mpa470-630Mpa22%-5027J
101mm-200mm285Mpa-315Mpa450-600Mpa21%-5027J
201mm-250mm275Mpa-285Mpa450-600Mpa21%-5027J
The min impact energy is longitudinal energy

S355ML TMCP Steel Plates Specifications :

  •   Steel Standard: EN 10028-4
  •   Thickness: 10mm – 100 mm
  •   Width: 2m, 2.5 and 3 meters
  •   Length: Up to 12 meters

Chemical Composition For S355ML TMCP Steel Plates

C maxSi maxMn maxP maxS maxNb maxV maxAl maxTi maxCr maxNi maxMo maxCu maxN max
0.140.501.600.0250.0200.050.100.020.050.300.500.100.550.015

Mechanical Property For S355ML TMCP Steel Plates

GradeMin Yield strength in different thicknessMin tensile strength in different thicknessMin Elongation in different thickness

≤ 16> 16 ≤40> 40 ≤63> 63 ≤80> 80 ≤100> 100 ≤120≤40> 40≤63> 63≤ 120

S355ML355345335325325320470-630450-610440-6002

S355ML TMCP Steel Max CEV In The Following Different Thickness

≤16> 16≤40> 40≤63> 63≤120> 120≤150
0.390.390.400.450.45

S355ML TMCP Steel Plates V Shaped Impact Test Temperature And Min Energy

Grade200-10-20-30-40-50
S355ML40343027232016

Types Of S355ML TMCP Steel Plates

S355ML TMCP Steel PlatesEN 10025-3 S355NL steel plate
S355NL steel plateDIN EN 10025-3 S355NL Non- Alloy Structural Steel Plate

S460NL Structural Steel Plates Specifications

  • Steel Standard: EN 10025-3
  •   Thickness: 6mm– 80 mm
  •   Width: up to 3 meters
  •   Length: Up to 12 meters

Chemical Composition For S460NL Structural Steel Plates

CSiMnPSAltotal *NCr
0.200.601.00-1.700.0250.0200.020 min0.0250.30
Cu **MoNbNiTiVNb+Ti+VMo+Cr
0.550.100.050.800.050.200.220.30

Mechanical Property For S460NL Structural Steel Plates

Product ThicknessYield Strength MPaTensile Strength MPaElongation
up to 16 mm460 min540 to 72017 min
16 to 40 mm440 min540 to 72017 min
over 40 to 63 mm430 min540 to 72017 min
over 63 to 80 mm410 min540 to 72017 min
over 80 to 100 mm400 min540 to 72017 min
over 100 to 150 mm380 min530 to 71017 min
over 150 to 200 mm370 min530 to 71017 min

Impact Energy Values For The Normalised Condition

a) longitudinal

-50 OC-40 OC-30oC-20 OC-10oC0 OC+20 OC
27 J min31 J min40 J min47 J min51 J min55 J min63 J min

b) transverse (if agreed at time of order)

-50oC-40oC-30oC-20oC-10oC0 OC+20oC
16 J min20 J min23 J min27 J min30 J min34 J min40 J min

Types Of S460NL Structural Steel Plates:

EN 10025:3 S460NL460 Yield Steel Plate
S460NL Structural Steel PlatesBS EN 10025 S460NL Steel Plates
S460NL steel plateS460N and S460NL normalized structural steel plate

S460NL Structural Steel Plates Application:

  •   Bridges
  •   Grouted tees/Grouted sleeves
  •   Pipe caps/Pipe fittings
  •   Pipe lines
  •   Plate girders
  •   Pressure vessels
  •   Road tankers

EN 10028-3 Grade P460NL1 Plate as per International Standard

P460nl1 Steel plates are widely available in the market that is made up of various materials and elements. P460nl1 Steel Plate is one such type that covers a range of weldable fine grain steel. They are supplied in normalized conditions with the purpose to be used in applications that work under pressure. EN 10028-3 Grade P460NH Plate is hot rolled that destroys the casting structure of ingot, eliminates the defects of microstructure, and refines the grains. This improves the mechanical properties of the p460nl2 plate and makes the steel structure dense. The improvement is clearly seen in the rolling direction. 

EN 10028-3 Grade P460NL1 Plate can at times have cracks, bubbles, and looseness that is formed during pouring the alloy into the mold. This can be removed by welding them under high temperatures and pressure. P460nl1 Steel Plate is also referred to as resistant to atmospheric corrosion. They are said to be inexpensive and highly effective. A thick layer of rust is formed on the plate due to oxidation that takes place because of pollutants in the air. P460 Nl1 Steel Plates are therefore protected due to this protective layer of rust that prevents corrosion. This layer forms over time regenerate itself consistently.

En 10028-3 P460nl1 Steel Plate is widely used in the fabrication of boilers, and pressure vessels in industries such as manufacturing, petrochemical, and shipbuilding. Moreover, these EN 10028:3 P460NL1 Plates are used in heat exchangers in the oil sector, storage tanks, gas projects, power plants, and many other applications. They are also used in pressure vessels and pipes transporting hot liquids. 460 Yield Steel Plate significantly reduces the weight of any component that they are used in due to the high strength to weight ratio. They also offer a flawless surface along with good ductility. Our products are made up of high quality and are available at affordable prices.

460 Yield Steel Plate Manufacturer, see P460Nl1 Steel Plate 

P460NL1 Steel Plates Specifications

  •   Steel Standard: EN 10028-3
  •   Thickness: 8mm-100mm
  •   Width: 1500mm-3500mm
  •   Length: 3000mm-18000mm

Chemical Composition For P460NL1 Steel Plates

CSiMnPSAl total *NCr
0.200.601.10-1.700.0250.0150.020 min0.0250.30
Cu **MoNbNiTiVNb+Ti+V
0.700.100.050.800.030.200.22

Call for small piece of EN 10028:3 P460NL1 Plate to test before buying

Mechanical Property For P460NL1 Steel Plates

Product ThicknessYield Strength MPaTensile Strength MPaElongation A%
up to 16 mm460 min570 to 73017 min
16 to 40 mm445 min570 to 72017 min
over 40 to 60 mm430 min570 to 72017 min
over 60 to 100 mm400 min540 to 71017 min

Impact Energy Values For The Normalised Condition

a) transverse

-50 OC-40 OC-20 OC0 OC+20 OC
–27 J min35 J min50 J min60 J min

b) longitudinal

-50oC-40oC-20oC0 OC+20oC
30 J min40 J min50 J min70 J min80 J min

View thickness & ready sizes of EN 10028-3 Grade P460NH Plate

Equivalent Steel Grade Of P460NL1 Plates

Equivalent steel grade of P460NL1

Types Of P460NL1 Steel Plates

EN 10028:3 P460NL1460 Yield Steel Plate
Yield Steel Plate EN 10028:3 P460NL1EN 10028-3 Grade P460NL1 Steel Plate
EN 10028:3 P460NL1 STEEL PLATE

P460NL1 Steel Plates Application

  •   Bridges
  •   Grouted tees/Grouted sleeves
  •   Pipe caps/Pipe fittings
  •   Pipe lines
  •   Plate girders
  •   Pressure vessels
  •   Road tankers

S460ML Structural Steel Plates, EN 10025-4 S460ML Steel Plates

EN10025-4 S460ML Offshore Steel Plates

S460ML Steel plates are mostly developed as per European standards. These plates have specific properties that are defined in the specification. S460ML Steel Plate is one such type of plate that is a thermochemically rolled weldable fine grain structure. The S460ML specification has a meaning encrypted in the code. The S stands for structural steel, and 406 is the tensile strength. The M mentioned in S460ML Steel Plate refers to the delivery condition while the L stands for the quality of minimum specified value of impact energy at a temperature that does not go below -50 degrees C. 

S460ML Structural Steel Plates have high strength and excellent frangibility that allows the steel structure to be made using thinner steel plates. This helps in reducing the number of welded joints. These plates are said to be durable and environmentally friendly. Using these EN 10025-4 S460ML Steel Plates for a structural section such as the construction of multi-story and high-rises offers a number of benefits. These benefits include reduction of structural section size and light building with equal structural safety. S460ML Welding steel plate also offers good weldability thus requiring little or no pre-heating along with less welding material. 

S460ML Low-Alloy High-Strength Steel Plate when used for construction of columns leads to a reduction of 10-30 % of the weight. The thickness of these plates varies between 10-100 m whereas the width is up to 3.5 m. The length of these EN10025-4 S460ML Offshore Steel Plates may be up to 12 m depending upon the end use of the product. They are passed through various tests to ensure that they have maintained all the properties as per the required specifications. En10025-4 S460ml Tmcp Plates For Offshore Use is supplied mostly to oil and gas industries and natural gas exploration industries. They are said to be best suited for these industries due to the properties inherited by them from the alloy used.

S460ML Structural Steel Plates Specifications

  •   Steel Standard: EN 10025-3
  •   Grade: S460ML(1.8838)
  •   Thickness:10 to 100m
  •   Width: up to 3.5 meters
  •   Length:Up to 12 meters
  •   Approval By Third Party:ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE
  •   Classification:Normalized rolled weldable fine grain structural steels

Comparison Of Steel Grades

S460ML EN 10113-3 Number:1.8838SEW 083TStE 460 TM
NFA 36-201E 460 FP
UNI 7382Fe E 460 KGTM
BS 436055 EE
ASTMA 572 Gr.65

Buy En10025-4 S460ml Tmcp Plates For Offshore Use and Pay only for the sizes you buy

Chemical Composition For S460ML Structural Steel Plates

EN10025-4 S460ML Chemical Composition
GradeThe Element Max (%)
CSiMnPSAlN
S460ML0.180.651.800.0300.0250.0150.027
NbVTiCuCrNiMo
0.060.140.060.600.350.850.23

Mechanical Property For S460ML Structural Steel Plates

GradeThicknessYield StrengthTensile StrengthElongationImpact Energy
(mm)MPa (min)MPa% (min)(KV J) (min)




-50 degree
S460ML≤16460540-7201727
16> to ≤40440540-7201727
40> to ≤63430530-7101727
63> to ≤80410510-6901727
80> to ≤100400500-6801727
100> to ≤120385490-6601727

We Keep Bulk Stock S460ML Low-Alloy High-Strength Steel Plate at our stockyard, contact us for Free Sample & stock list

Equivalent Grades Of Grade S460ML (1.8838)

Germany DIN,WNrFrance AFNOREngland BSItaly UNIChina GBUSA ASTMRussia GOST
TStE 460 TME 460 FP55EEFe E 460 KTTM
A572 Gr.65

S460ML Normalized Steel V Shaped Impact Test Temperature And Min Energy

Grade200-10-20-30-40-50
S460ML40343027232016

Types Of S460ML Structural Steel Plates

EN 10025:3 S460NL460 Yield Steel Plate
S460ML Structural Steel PlatesBS EN 10025 S460NL Steel Plates
S460NL steel plateS460N and S460NL normalized structural steel plate

Cut to size S460ML Welding steel plate, view Equivalent

S460ML Structural Steel Plates Application

  •   Bridges
  •   Grouted tees/Grouted sleeves
  •   Pipe caps/Pipe fittings
  •   Pipe lines
  •   Plate girders
  •   Pressure vessels
  •   Road tankers